Remove screen whine from Tungsten E

CÓMO REMOVER EL ZUMBIDO DE TU PALM.
(Por Fede)
DISCLAIMER: I am not responsible for any damage that your device may receive from following these procedures. Do this at your own risk.

I created a guide to help others know how to repair screen whine of the LCD. this guide is based on http://www.palminfocenter.com/forum/viewtopic.php?t=29420

1) Opening the device
3) Disconnect the battery
4) Remove the copper cable located between the mainboard and the screen
5) Have the screen is disconnected from the connector cable. This can be pried open with a small flat head screw driver

The clear part is the digitizer[touchscreen] which is plastic like. The other part is the LCD. Be careful not to break the small cable connecting the digitizer to the LCD

6) Screen whine is caused by the LCD coming in contact with digitizer. Placing paper between LCD and touchscreen should eliminate screen whine.

7) After doing your required repair, put it back together. Good luck.

full-sized images: link